In the 1970's my aunt Sharon made our family an Advent Calendar.  It's crafted almost entirely of acrylic felt and quite a testament to the crafting movement of the era.  I'm very sentimental about it, even though we were not particularly religious, growing up. I just remember waking up each day, excited to put another ornament on the tree.  Thankfully, my mom kept it around for the years after I left home and then gave it to me later on.  We carry on this tradition at home today and my 14 year old daughter feels as sentimental about it as I do.

A few months ago, one of my dear Bridal clients (from when I did that) dropped by to donate some sewing materials her son acquired from an estate sale. Inside were these tiny little ornaments, exquisitely and painstakingly beaded. I knew they would come into some use, when I saw that they were all Christmas themed.  So that is what led me to re-make this wonderful holiday craft. I've put together 6 kits that we are selling ($50 each) with either a mustard or Aqua background. You can buy them from me, or make your own using the directions below.  Either way, I hope you enjoy!  And Happy Holidays to you and your families!

Directions for Advent Calendar:

Materials list -

• Craft Felt - Wool or acrylic in multiple colors - 1 rectangle measuring 36 1/2" long x 17" wide, 3 rectangles measuring 2 1/2" long x 17" wide (for pockets) in the same background color,  3/4 yard green for the tree and misc. felt squares for the ornaments.
• Ribbon or cord for the ornaments - 2 yards narrow width (1/8" or smaller)
• Cotton holiday print fabric for ornaments - I bought several fat quarters and then cut out the shapes as they were the perfect size.  Note: You may have to do some hunting around to find the right fabric, or just make more ornaments out of felt.  Our calendar has little pieces of holiday cards with ribbon hangers glued on in addition to the felt ornaments.
• Various additional tiny ornaments that are small enough to put in the pockets - I bought these from a craft store. note: you need 24 ornaments in all, so it's nice to have a few that are already made.
• A small amount of polyester or cotton fiberfill for stuffing the ornaments.
• 1 package of large red sequins - I think ours were 8mm and you will need 24 total.
• 24 small glass beads - these are used in combination with the sequins and the ornaments will hang from these
• (1) 3/8" diameter wooden dowel 18" long - I had an 1/8" whole drilled 1/2" away from each end.
• 36" of narrow (1/16") cording for the hanger.
• Misc. beads and sequins for decorating the ornaments.
• Thread, sewing machine, waxy tracing paper (for transferring numbers), tracing wheel and all your standard sewing tools.

STEP ONE making the fabric ornaments -

• Cut around shapes leaving 1/8"-1/4" seam allowance. You will need two for each ornament.
• Cut a 3" piece of narrow ribbon or cord for the hanger and pin in place as indicated in the photo.
• Place right sides together and  pin around outer edge.
• Stitch around outside edge, leaving small space along the bottom, to turn right side out.
• Turn ornament right side out and stuff with a little bit of fiberfill.
• Fold seam allowances to inside and pin in place.  Hand stitch closed, using a slip stitch or ladder stitch.

STEP TWO - Making the Felt Ornaments

• Cut two pieces of felt in the shape you want (we have a diamond shape and a rectangle  pictured).
• Cut 3" long piece of narrow ribbon or cord and pin to wrong side of felt at top of ornament, as indicated in the photo.
• Place a small amount of fiberfill on wrong side of one piece and place the other side of the ornament with wrong sides together.
• Pin around outside edge then stitch together around entire outside, making sure to catch the hanger in your stitches.
• Decorate your ornaments with top stitching or beads as you desire. 

STEP THREE - Prepping the pocket rectangles

• Sew a decorative stitch across the top edge (on long edge) of each pocket rectangle. I use this same stitch for all the decorative stitching on the back ground pieces and the pockets, but feel free to change it if you want to use more of the stitches your machine offers. Note: you do not want to use stitches that will be wider than 1/4" as this will make the pockets too small.
• Trim the rectangles to fit the background width.

STEP FOUR - Transferring the numbers to the pockets.

• In my kit, I've created a template for the numbers.  If you are doing this on your own, you will need to create a template.  It's easy to do in Microsoft Word or Google docs.  You will just need to create a TABLE with columns measuring 2" wide x 2 1/2" tall with 1/8" wide columns in between. Find a font you like and type in numbers 1-24 in each of the larger cells. Pick a font size that works so that the numbers fill up the box.
• Print and cut out, your numbers, then tape them together in 3 rows: 1-8, 9-16 & 17-24.  Make sure they fit within the 17" width with 1/4" space on the outer edges.
• Transfer the numbers to the pocket rectangles using tracing paper and a smooth edged tracing wheel.
• Filling in the Numbers - I stitched on the transferred numbers using a machine straight stitch and had to go over them a few times.  You can also hand embroider the numbers or use fabric paint.  The original calendar was done using fabric paint.

STEP FIVE - Creating the dowel casing

• Fold top edge of calendar rectangle (background) to back side 1 3/4" & pin in place.
• Using a decorative stitch, sew a line of stitching across the top edge using 1/2" seam allowance.
• Using the same decorative stitch, sew another line of stitching across the top edge using 1" or  1 1/4" seam allowance.  There should be at least a 3/4" space between the stitch lines.

STEP SIX -  Finishing the Pockets

• Place the finished pocket rectangles at the bottom of the background rectangle on the front side. The rectangles should be flush to the sides and bottom edge and 1/2" apart. Pin in place.
• Using a decorative stitch, stitch around the outside edge of background rectangle, starting and ending at the lower dowel casing stitch line,You do NOT want to stitch through your casing.  Also, make sure your decorative stitch lands about 1/8" away from outer edge.
• Mark vertical lines, either with chalk or a steam away pen, between the numbers. Then, stitch between the numbers, vertically, along those lines, using your decorative stitch.

STEP SEVEN - Attaching the Tree

• In my kit, the trees have been pre-cut .  If you are making this on your own, you will need to create a tree pattern. Ours measures 20" long x 16" at the widest point.  There are 5 branch points on each side tapering in fullness from bottom to top.
• Place your tree evenly between the two sides and between the pockets and the bottom edge of dowel casing. Pin Trunk in place.
• Using a decorative stitch, stitch trunk in place, around it's three edges.
• Pin tree in place so it won't move and, using a decorative stitch, stitch swags diagonally across tree.
• Note: the original calendar had the tree glued in place in various spots. I chose not to clue, but to sew, in order to secure the tree in place.
• Mark the spots of your sequins by placing 24 pins through the tree in an organized fashion. Take a look at the finished tree for general placement.

STEP EIGHT - Sewing on the sequins (ornament holders)

• Divide a strand of embroidery floss into sections.  Mine has 6 plies and I divided into two strands of 3 plies each.
• Thread a needle with your floss and, from the back side, pock through the tree at one of the pinned positions. Leaving about 1 1/2" of thread on the back side, load a Sequin (curved edges up) and a bead onto the needle.  Push the sequin and pin down the thread to the tree.
• Now, put your needle through the sequin again and back through the tree to the back side of the calendar. The sewn bead will secure the sequin in place.
• Using both ends of your floss tie a double knot to finish securing the bead and sequin in place.
• Trim your thread, and repeat for the other 23 sequin/bead ornament holders.

STEP NINE - Dowel & Hanger

• Push dowel through casing at top edge of calendar, leaving 1/2" exposed on each end.
• Using a 36" long piece of 1/16" diameter cording, thread through holes on each end of dowel. (Ends of cording should exit holes toward bottom of calendar. )
• Double or triple knot cording ends on each side, to prevent from exiting holes.
• Note: if you do not have a drill to make 1/8" holes in dowel, just make a slip knot loop at each end of cording and slip on to dowel ends.

You are All Done!  Just place ornaments in pockets and hang on the wall on December 1st.

Until next time, Happy Sewing!

xo

Jennifer